Sky F
- Total activity 20
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 0
- Subscriptions 11
Activity overview
Latest activity by Sky F-
Sky F created an article,
Row Sport: "I feel Resistance, I just can't see it in the app even though I can all other stats."
Take off the left side shroud. Where the Bluetooth module is, do you see the slider still attached to the magnet arm or is it hanging down? If it is no longer attached then the app is not being tol...
-
Sky F created an article,
I see resistance changing on my bike, but I do not feel it.
Step 1When testing the physical resistance on your bike, make sure you are on level 32.Connect the bike via Bluetooth to the app, open a freestyle ride from the more section.Once the Blue light b...
-
Sky F created an article,
My Echelon Stride Has a Squeaking Noise
The squeaking noise could be caused by the incline bushings or the bolt for the incline motor housing on the unit.See photos below for more details.Fold your treadmill upright. We want to take a lo...
-
Sky F created an article,
Stride-5s / Stride-7s Stuck at "Tap Serial Number to Connect" or " Getting Equipment Info"
1. On Stride 5s/7s if you come to "tap serial number to connect" (shown below) and cannot get past it please try these steps: 2. Insert the safety key fully 3. Press and hold the 1+7 until th...
-
Sky F created an article,
Resistance Is Not Working on My Bike
If you can see Cadence, Output, Calories, Speed, and Distance changing in the app while you are in a ride, but Resistance stays at 1 or fluctuates irregularly in the app, even though you can feel R...
-
Sky F created an article,
Bike Pedals will not move ( Wheel Chock ) EX Series
Scroll down until you see your bike. EX15GTGT+SportSport sEX1EX3 EX4s10EX5EX5s10EX5s22EX7s EX8s EX Pro EX4s+
-
Sky F created an article,
No blue light on the Bike/Rower Only the Screen has Power
If there is no flashing blue light between the handlebars of the bike/middle of the rower after you have attempted to wake the equipment by pedaling the bike/pulling the handlebars on the rower, bu...
-
Sky F created an article,
Getting Connected to the app on the Equipment screen or the mobile Echelon Fit app via Bluetooth
Connecting Equipment to Mounted Screen via Bluetooth 1. Unplug the equipment from the wall.2. Plug the equipment back into the wall.3. The equipment will beep, then the blue light will flash, betwe...
-
Sky F created an article,
Every Stat Except Resistance Is Not Working on My Bike
If all stats (Cadence, Calories, Speed, Output, and Distance) are remaining at zero except Resistance, it is changing accurately in the app, then you likely have a defective speed sensor. Depending...