My Reflect 50" Touch or 40" Touch Sport Is Stuck in an Update Loop or Will Not Connect to Wi-Fi (Flashing the Firmware)

Download

Reflect touch firmware image link:

• https://drive.google.com/open?id=12rmdAqCM1wJi6l9xvJ7Xrqr8naIxpbtQ

Equipment

• USB drive formatted to FAT32

Install Reflect Touch Image Instructions 

1. Download the update image and place onto a USB drive.
2. Place the update image on the USB drive.
   a. The file name must remain as "update.img"
   b. The file should be in the root directory (not placed into any folder on the USB drive)
   
3. Make sure the Reflect is off, and plug the USB drive on in the back of the mirror.
4. Turn the Reflect mirror on and wait until a dialog pops up prompting to install the update.
5. Tap install update.
6. The Reflect mirror will be factory reset.
7. The Reflect mirror will need to be set up again and should be getting updates again.
   
   Note:
   If you get an error message, then go back to step 3 and try to use the other USB port on the Reflect.