SPD Clip Is Too Loose/ Too Tight Ryan Wright October 27, 2020 18:28 Updated Follow Solution: Adjust SPD clip spring tension by turning adjustment screw clockwise (tighter) or counterclockwise (looser) Related articles What Shoes Should I Wear? How to properly disassemble and reassemble my pedal Bike Unstable/ Wobbling How to manage your Echelon fit account How to Change Mounted Tablet Time Zone for Daylight Saving Time Comments 16 comments Sort by Date Votes Rachelle Carreon December 11, 2020 14:30 My bike did not come with the proper tool to make this adjustment. After reaching out to customer service, I was told this would have to be purchased on my own. The tool description I was given was: Torx-cr-vt15 0 Comment actions Permalink Rachelle Carreon December 13, 2020 16:19 Update: it’s not the Torx-cr-vt15 tool. It’s a 3mm hex. 0 Comment actions Permalink Mrs J Turl February 08, 2021 15:35 My shoe cleat got stuck in the clip and to release it I undid the tension spring screw, the spring popped open and the cleat got released but I can't put the spring back in place now. It is very rigid and the spring clasp will not go far enough back and flat to screw it back in position. Do I need to apply force or what is the method please? 0 Comment actions Permalink Kiva Thompkins February 09, 2021 03:12 I’m having the same issue. Someone please help!! -1 Comment actions Permalink Beverly Winsch February 15, 2021 17:09 Where is the adjustment screw>>>> -1 Comment actions Permalink Patrick Brand February 23, 2021 12:43 I’m having the same issue, I even took the pedals to a bike mechanic and they couldn’t find a screw to adjust the spring tension 2 Comment actions Permalink Rachelle Carreon February 23, 2021 19:51 I was able to use a 3mm hex tool to adjust the spring tension. I unintentionally loosened it all the way and the bolt on the back popped off. I had to take apart the entire pedal and use a wrench to compress the spring and get the bolt back on. 0 Comment actions Permalink Yugang Cui February 26, 2021 01:55 I got the right tool and found the adjustment screws. However, after making adjustments (loosened it to the point that any further the bolt and spring would pop off), I still can't clip in the pedals. My shoes have Shimano SM-SH56 cleats. I need help, please. 2 Comment actions Permalink Katie Lewis March 05, 2021 16:38 Edited I am so frustrated!! I have never had SPD pedals that you cannot release the tension that easy. Really?? Why would you put the tension so high the shoe won’t release. Glad i put the shoe on the pedal first since I have bad knees😡. When I released the tension the back of the screw comes off. Ugh!!! Hopefully, I can eventually get it back on. Found out you push the back of the SPD clip after you release the Hex to make it the right size to your shoe. 0 Comment actions Permalink Tom Wisniewski May 03, 2021 23:19 How about showing a video on how to address this problem of a stuck cleat. I currently have to leave one Echelon shoe on the pedal all the time. 1 Comment actions Permalink rachel massey May 29, 2021 22:27 We just had the same issues everyone else on this thread is. Replaced the echelon pedals with straight up Shimano pedals and my shoes are clipping in as easily as they should. 0 Comment actions Permalink Patrick Brand May 30, 2021 03:17 That’s what I ended up doing myself, we waited two months for replacement pedals from Echelon and they sent us another pair of the crappy pedals that had the exact same problem, I think they should give me two months free on my membership for the down time when I was waiting and couldn’t use the bike 0 Comment actions Permalink Jennifer Prichodko June 03, 2021 05:01 Edited I had this happen as well where my shoes with SPD cleats wouldn’t release - I eventually forced them out but the cleats ripped off my shoes and got stuck in the pedals. Called customer service, they were useless and provided no help. Went online and found some info about how to get your shoes/cleat out. I had to loosen that hex on the back of both pedals with an Allan key to get them out and just like everyone’s post above, it popped off and was nearly impossible to get back on. I knew something was up so I did some more research to find out what the heck was going on. Turns out you need a different kind of cleat for Echelon pedals which they do not tell you anywhere. Based on another user’s post online I bought a Shimano SM-SH56 SPD MULTI RELEASE cleat. It works fine now. Clips in and out easily. Do not just buy a regular SPD cleat and don’t bother calling to replace your pedals. 0 Comment actions Permalink Tom Wisniewski June 03, 2021 05:52 I'm having trouble with the cleat releasing. I have an Echelon bike and bought Echelon shoes with the Echelon furnished cleats. Still have a problem. I have used other bikes with other cleats with no problem getting them to release. 0 Comment actions Permalink Yugang Cui June 03, 2021 18:14 Jennifer Prichodko I do have SM-SH56 SPD cleats on my shoes, which do not work with Echelon's pedals. I have the model ECHEX-4S-10-C, which I purchased from Costco. I wonder if Echelon has released any new pedals or provides any parts to improve their pedals so that Shimano SM-SH56 SPD Multi Release cleats can fit in their pedals. Thank you in advance for any hints. 0 Comment actions Permalink Gary Rosner June 04, 2021 17:04 I am having the same problem clipping into the pedals. I have the Echelon SPD Compatible Pedals with Toe Cages that I bought from Echelon. I also have a new set of Shimano SM-SH56 cleats. The right side sort of works, but the left shoe won't clip in. I loosened the tension of one pedal to the point that the screw popped out. I bought locking C clamp pliers to hold down the spring and got the screw and bracket back on. I have older SPD cleats that I will try, but I think these pedals were a waste of money, especially if regular Shimano or SPD-compatible pedals would have worked. 0 Comment actions Permalink Please sign in to leave a comment.